Blog
NEWS

Blog

Media coverage

Company News

14

2023-01

A comprehensive guide to understanding all aspects of scraper flowmeter applications

The scraper flow meter is specifically designed to deliver precise flow rates over a defined period. This exceptional ability to accurately measure and transfer the media is known as metering. Thanks to this unique capability, many different types—regardless of whether they’re scraper flow meters—can technically be classified as flow meters. However, most of these are further categorized into solenoid-driven, mechanically driven, or hydraulically driven control systems. Typically, scraper flow meters allow users to set, adjust, and even program flow rates via a dial, touch panel, or other intuitive control mechanisms. Below, you’ll find a comprehensive guide to understanding the applications of scraper flow meters.

2023-01-14

A comprehensive guide to understanding all aspects of scraper flowmeter applications

11

2023-05

Gain a thorough understanding of the applications of scraper flowmeters.

Gain a thorough understanding of scraper flowmeter applications. Scraper flowmeters typically allow users to set, optimize, and even program the flow rate using a main dial, touchpad, or other control methods. Below, we’ll introduce you to the fundamental knowledge about scraper flowmeter applications.

2023-05-11

Gain a thorough understanding of the applications of scraper flowmeters.

11

2023-05

Experimental Characteristics of Scraper Flow Meters in Crude Oil Metering Verification

Experimental Characteristics of Scraper Flow Meters in Crude Oil Metering Verification Under the action of pressurized fluid, the scraper is driven to rotate along with the stator. The scraper continuously slices the liquid into discrete volume segments, which are then accurately measured and recorded by a transmission gear system coupled with a counting mechanism that indicates the total liquid output.

2023-05-11

Experimental Characteristics of Scraper Flow Meters in Crude Oil Metering Verification

11

2023-05

The Basic Principle and Construction of Elastic Scraper Flow Meters

The Basic Principle and Construction of the Elastic Scraper Flowmeter The rotational motion of the stator is transmitted via a magnetic coupling mechanism to the drive gear assembly, which adjusts the system accordingly. The number of rotations of the motor rotor is then converted into a corresponding platform flow value, which is accumulated and displayed by an electronic counter—or, alternatively, transformed into an electronic signal via a transmitter—for use in the entire measurement and verification process.

2023-05-11

The Basic Principle and Construction of Elastic Scraper Flow Meters

11

2023-05

Installation and Calibration of the Large Rotary Scraper Frame

Installation and Calibration of the Large Rotary Scraper Frame The rotary scraper frame is designed to support the rotating scraper. Once installed, the large rotary scraper frame provides stable performance, making it ideal for scraping large-sized sand molds. The rotary scraper frame can be mounted directly within the pit. Alternatively, if the base is equipped with four pre-machined holes, it can also be securely installed on a platform.

2023-05-11

Installation and Calibration of the Large Rotary Scraper Frame

11

2023-05

Structure and Working Principle of Conveyor Scraper

Structure and Working Principle of Conveyor Scraper Blades Structure and Working Principle of the Main Components of Conveyor Scrapers: 1. Transmission Section: The transmission section primarily consists of components such as the motor, reducer, sprockets, head frame, tongue plate, idler shaft, and chain tensioner. The coupling cover integrates the motor and reducer into a single unit. Power is transmitted from the motor through the reducer to the sprockets.

2023-05-11

Structure and Working Principle of Conveyor Scraper
< 1...5678 >